Moelven produce approximately 2 millon m3 Sawn Timber, equivalent to approximately 3.9million m3 of logs. The log sourcing for Moelven mills is mainly from the middle of Sweden and the south-east of Norway where the fibre is slow grown and strong.
All sawmills are both FSC® or PEFC® Certified.
These products are for interior purposes such as stairs, doors, windows etc. The edges are practically knotless, while the face and the back may contain knots, also some smaller black knots. We can also offer speciality joinery products such as free of heart center (FOHC), green-split, or cut to size/ purpose.
Typical dimensions: 38 x 125/ 150/ 175/ 200 mm, 50 x 125/ 150/ 175/ 200 mm, 63 x 125/ 150/ 175/ 200 mm, 75 x 150/ 175/ 200 mm
Relevant sawmills: Mjøsbruket, Løten, Våler, Dalaträ, Notnäs, Norsälven and Årjäng Såg
The best redwood sideboards for Mouldings. 3-sides free of knots.
Typical dimensions: 16 x 075/ 100 mm, 19 x 075/ 100/ 125/ 150 mm, 25 x 075/ 100/ 125/ 150/ 200 mm, 32 x 100/ 125/ 150 mm, 38 x 100/ 125/ 150 mm
Relevant sawmills: Dalaträ, Valåsen, Norsälven, Notnäs, Årjäng Såg and Løten
Whitewood or redwood for production of pallets, boxes, cases etc. The quality is normally sixths in white- or redwood.
Typical dimensions: 16 x 075/ 100/ 125 mm, 19 x 100/ 125/ 150 mm, 22 x 075/ 100/ 125 mm, 25 x 075/ 100/ 125/ 150 mm, 50 x 100 mm, 75 x 075/ 100/ 125/ 150/ 200 mm.
Relevant sawmills: All sawmills
Our raw material for exterior cladding is specially selected from a 2X-log sawn product. The material is slow grown with tight grain, sorted as US-V. This product normally comes in whitewood but can also be offered in redwood.
Typical dimensions: 42 x 100/ 150 mm, 44 x 100/ 125/ 150/ 175 mm, 50 x 125/ 150/ 175/ 200 mm, 63 x 125/ 150/ 175/ 200 mm.
Relevant sawmills: Mjøsbruket, Numedal, Soknabruket, Telemarksbruket, Våler, Notnäs, Ransbysågen, Valåsen and Årjäng Såg
We produce glulam lamellas for the quality conscious and demanding Scandinavian glulam industry, and we also export to UK, Germany, France and Japan. The lamellas are Dynagrade machine stress rated to the classes LS 15 and LS 22, and are in addition sorted visually to ensure the aesthetic quality. At customers request we can offer lamellas with knot-free ends, thereby facilitating the fingerjointing in the glulam factory. Moisture content is normally 12% +/- 2%. Our log harvesting area allows us to offer a very good product for the glulam industry, and with an average length of more than 4.5 meters. ** (See Notes below)
Typical dimensions: 50 x 100/ 125/ 150/ 175/ 200 mm
Relevant sawmills: Mjøsbruket, Numedal, Våler, Notnäs and Årjäng Såg
To secure a long life for a window, the raw material must be carefully selected. We sort the logs on species, grain /width of year rings, extent of heartwood, and general quality before sawing. The inner pieces can be sorted separately for their heartwood share, while outer pieces can be for fingerjointing. The customer based quality sorting is then done before drying, enabling us to differ the M.C. according to customers requirements. The species for these products is normally redwood.
Typical dimensions: 50 x 088/ 100 mm, 63 x 063/ 075/ 085/ 105/ 125 mm, 75 x 075/ 085/ 100 mm
Relevant sawmills: Dalaträ, Valåsen, Løten and Årjäng Såg
The material is slow grown with tight grain, sorted as either US I-III or US-V. This product normally comes in whitewood but can also be offered in redwood.
Typical dimensions: 32 x 125 mm, 38 x 100/ 125 mm, 44 x 100/ 125 mm, 50 x 100/ 125/ 150/ 175/ 200 mm
Relevant sawmills Whitewood: Numedal, Våler and Ransbysågen
Relevant sawmills Redwood: Løten, Våler, Soknabruket, Telemarksbruket, Dalaträ, Notnäs, Ransbysågen and Norsälven
Raw material to planing mills producing a.o. exterior cladding, exterior wooden roofing and decking material. Heartwood is the inner part of the trunk in an aging tree. The heartwood is naturally impregnated by extracted substances from the tree itself, clogging the wood cells and thereby counteract fungi and rot decay.
Typical dimensions: 38 x 150/ 200 mm, 42 x 150 mm, 43 x 150/ 200 mm, 44 x 150 mm, 50 x 150/ 200/ 225 mm, 63 x 150/ 200 mm
Relevant sawmills: Løten, Soknabruket, Telemarksbruket and Dalaträ
Specially dried timber. These products are produced ex a top or a middle pine log, with only fresh knots accepted.The moisture content is normally 8% +/-2%. The product is well suited for edge glued furniture panels and other products meant for visual exposure.
Typical dimensions: 32 x 125 mm, 38 x 100/ 125 mm, 50 x 100/ 115/ 125 mm.
Relevant sawmills: Løten and Dalaträ
Other products/ dimensions on request!
Notes:* In many of the mills we machine stress rate to the required strenght class with Dynagrade machines. All our construction timber is CE-marked. Our production of construction timber is third party controlled and certified by SP Technical Research Institute of Sweden or the Norwegian Institute of Wood Technology.**We can also supply most of the different structural/ strength classes according to the European Standard EN 388, for instance C 18, C 24, C 30, T15, T22 etc.